Aprašymas
Magnetic Trigger Resistance Clicker by Perun for Hybrid V2 Processor Units
Magnetic Trigger Resistance Clicker is an accessory designed for use with Perun V2 Hybrid processor units. This product provides a realistic trigger resistance similar to that of real firearms, making it ideal for those who seek more than just shooting from their airsoft gun.
How does the Clicker work?
Clicker uses a magnet and a lever to simulate a so-called wall, a method that reduces possible wear on parts (as happens with spring-based trigger resistance simulations) and offers an unparalleled feeling of resistance, break, and trigger reset.When the trigger is pulled, the metal part detaches from the magnet, with which it is in contact at rest. Because the magnetic field strength decreases rapidly with distance, the result is a relatively sharp break.The break force is increased using a lever. When released, an audible trigger reset occurs as the metal part gets very close to the magnet and immediately attaches to it.
Installation and Adjustment
1. Installation
To install the Clicker, simply remove the V2 Hybrid magnet holder from the trigger and the mechanical safety lock from the gearbox.Insert the Clicker into the gearbox.There may be some resistance during the assembly of both gearbox halves as the Clicker must remain absolutely still inside the shell to provide a pleasant trigger pull. Therefore, it is designed to fit as tightly as possible within the gearbox space.
2. Break Force Adjustment
The trigger break force can only be adjusted with the gearbox open. This is done using a small screw inside the lever. Turning the screw to the right decreases the break force, turning it to the left increases it. The Clicker is delivered with the highest possible break force by default, and the screw is completely retracted.
3. Pre-travel
Pre-travel is the part of the trigger movement with low resistance before encountering the wall. With most combinations of triggers (especially stock ones) and gearbox shells, there ..
