Arsenalas

SA-A29-M ONE™ TITAN™ V2 Custom Carbine Replica

Limited edition with TITAN™ V2 Advanced system by GATE installed!

Drop-In
MOSFET type TITAN™ V2 controller set transforms an AEG into an advanced
training replica. It provides a tactical advantage thanks to a lightning-fast
trigger reaction time with the ability to modify the replica and adapt it to
every mission with the help of 20 available functions. This is the most
advanced and top model by GATE. 

TITAN™
V2 controller will breathe new life into an ASG electric replica.

TITAN™ provides new possibilities:

–
Trigger sensitivity adjustment
– Pre-cocking boost – adjustment of the time that the spring is being kept
pulled (shortens the time between a squeeze of the trigger and firing)
– Adjustment of fire mode selector modes
– Burst mode
– Fire rate adjustment
– Notifies about a low battery level
– Protects battery from damage
– “Sniper delay”
– Full cycle detection
– AUG mode – the ability to set two trigger sensitivities (semi and full-auto)

Full
system description: https://gunfire.com/pl/products/zestaw-kontrolera-titan-tm-v2-advanced-set-rear-wired-1152218717.html

SA-A29
carbine replica by Specna Arms is made largely from a
uniform zinc and aluminum alloy, reinforced with steel elements in the most
vulnerable points of the replica (steel elements – all the screws, pins and
tactical sling swivels). The stock and the pistol grip were made from
polymer. The receiver of the replica and the RIS handguard have
undergone the
process of anodizing, which guarantees a high degree of
protection against corrosion. The paint was applied via a process of powder coating,
after having the surface undergo the process of sandblasting prior to the
application of paint. This provides a much higher than usual resistance of the
applied paint to abrasion. The receiver bears USMC markings.

The replica’s parts are very well aligned – in a way that could be thus far
noticed solely in replicas by such top-tier manufacturers as G&P or Classic
Army, the replica is also perfectly balanced. This allows for almost ideal
maneuverability of the replica and its weight is almost not
noticeable once the replica has been shouldered. 

The replica features a quick
spring change system, so-called Enter & Convert™. Due to
that system it is possible to rapidly and quickly adapt the power of the
replica to the conditions expected on the playing field without the necessity
to have access to a workshop or a set of special tools – once the gearbox has
been taken out of the replica’s body, the process of spring change lasts
literally seconds.

The advantages of Enter & Convert™ system are hard to overstate. In the
light of the current tendency in the whole Europe to use legal limitations
regarding the muzzle velocity of replicas or internal regulations inside
various groups, the system guarantees the user a varied set of possibilities
and much freedom. Enter & Convert™ system allows with a minimal amount of time to
exchange the main spring, thus to customize the muzzle velocity
towards the area of the game in such a way so as to guarantee an ideal
compromise between the effectiveness of fire and safety for the User himself as
well as other participants.

The replica is fully compatible with LiPo and LiFe
batteries. Due to the base muzzle velocity of ~410 FPS provided
by the main spring installed by default by the manufacturer, the replica is
perfect for operating on a medium range. The set also includes an M90 spring, which
allows to reduce the muzzle velocity to ~310 FPS and as a result to adapt the
replica for close-ranged and indoor operations.

A reinforced at the cylinder level gearbox contains a steel spring guide that
is an element of Enter & Convert™ system and mounted on 8 mm ball bearings and
caps steel gears.
The system is secured with four anti-reversal latches. A light, made of
polycarbonate polymer piston is equipped with a steel tooth in order to
increase its durability. Also, a
type 2 cylinder and a steel circuit-breaker, as well as a metal Hop-Up chamber.

The upgraded version features an array of new, reinforced parts such as:

– set
of reinforced, steel gears
– steel spring guide
– lightweight, polymer piston
– aluminum air-sealed piston head
– metal cylinder head
– air-sealed, metal nozzle

The
replica is equipped with a top RIS 22 mm rail, MLOK handguard and an SF stock.
The rail features three short RIS rails. The top RIS rail features flip-up iron
sights, which can be freely detached in order to make room for the attachment
of a chosen optoelectronic aiming device. Due to the extendable stock with an anti-slip
stock pad, it is possible to adapt the replica’s length to the body type and
preferences of the User. The custom flash hider is based on a 14 mm
left-handed thread, which allows the attachment of a silencer in its place.

In order to enhance the realism of the game, the replica also features an operational bolt-catch mechanism.

The replica comes with a steel, 300 BB, Hi-Cap magazine. 

Specna Arms
replicas are compatible with many magazines available on the market, from
manufacturers like:
 – BOYI,
 – Airsoft Systems,
 – SRC,
 – King Arms,
 – MAG, 
 – STAR,
 – ACM.

The set does not include a battery or a charger.

The set includes:

– limited edition replica with TITAN™ V2 system installed
– USB plug for the control unit using GATE Control Station app
– magazine 
– fixed iron sights
– additional main spring

ATTENTION:

According
to report number HKGEC1600157401, the product meets the requirements of European Union RoHS – Restriction of
Hazardous Substances 2011/65/EU directive annex II that amends the 2002/95/EC
concerning the limitation of dangerous substances in electronics.

Which
means that Specna Arms free from harmful materials
such as:
– lead
– mercury
– cadmium
– hexavalent chromium
– polybrominated biphenyl (PBB)
– polybrominated diphenyl ether (PBDE)