Arsenalas

SA-B01 SAEC™ System Assault Rifle Replica – Half Tan

SA-B01 assault rifle replica by Specna Arms is
made largely of a uniform zinc and aluminum alloy, reinforced with steel
elements in the most vulnerable points of the replica (steel elements – all the
screws, pins as well as the magazine and shell ejection window flap). The
adjustable stock, handguard that contains a battery and the pistol grip were made of polymer. The receiver of the
replica and the transport handle have undergone the process of
anodizing, which guarantees a high degree of protection against corrosion.
The paint was applied via a process of powder coating,
after having the surface undergo the process of sandblasting prior to the
application of paint. This provides a much higher than usual resistance of the
applied paint to abrasion. The receiver bears USMC markings.

The replica’s parts are very well
aligned – in a way that could be thus far noticed solely in replicas by such
top-tier manufacturers as G&P or Classic Army, the replica is also
perfectly balanced. This allows for almost ideal maneuverability of the replica
and its weight is almost unnoticeable once the replica has been
shouldered. 

The replica features a new generation quick spring release system,
so-called SAEC™. Due to that system, it is possible to rapidly
and quickly adapt the power of the replica to the conditions expected on the
playing field without the necessity to have the access to a workshop or a set
of special tools. The spring change process is even faster than in the
case of the previous version of the system.

Thanks to SAEC™ System, there is no need to take out the gearbox from the
replica – all that is required is to remove the stock slide (no tools are
necessary – it is attached with a
tightened ring and a latch), afterward it is necessary to loosen the located
underneath pin along with a ball bearing spring guide. We exchange the main spring, screw in the pin back in the body,
attach the stock and… we’re back in the game! The entire operation lasts but
a moment and, let us say it again, does not require the use of any tools.

The advantages of SAEC™ system are hard to overstate. In the light of the
current tendency in the whole Europe to use legal limitations regarding the
muzzle velocity of replicas or internal regulations inside various groups, the
system guarantees the User a varied set of possibilities and much freedom.
SAEC™ system allows with a minimal amount of time to change the main spring, thus customize the muzzle
velocity towards the area of the game in such a way so as to guarantee an ideal
compromise between the effectiveness of fire and safety for the User himself as
well as other participants.

The replica is fully compatible with LiPo and LiFe batteries. Due to the base muzzle velocity
of ~425 FPS provided by the main spring installed by
default by the manufacturer, the replica is perfect for operating in a medium
range. The set also includes an M90
spring, which allows reducing the muzzle velocity to ~325 FPS
and as a result to adapt the replica for close-ranged and indoor operations.

A reinforced at the cylinder level gearbox contains a steel spring guide
that is an element of SAEC™ system and mounted on 8 mm ball bearings and
washers steel gears.
The system is secured with four anti-reversal latches. Also implemented
were a type 2 cylinder and a steel
circuit-breaker, as well as a metal Hop-Up chamber.

The upgraded version features an array of new, reinforced
parts such as:

– set of reinforced, steel gears
– ball bearing spring guide
– light, polymer piston with a steel strip
– aluminum air-sealed piston head
– metal cylinder head
– air-sealed, metal nozzle

The replica is equipped with a top RIS 22 mm rail located beneath the
transport handle and an adjustable stock. Due to the extendable stock, it is
possible to adapt the replica’s length to the body type and preferences of the
User. A standard flash hider is based on a 14 mm left-hand thread, which
allows the attachment of a silencer in its place.

In order to enhance the realism of the game, the replica also features an
operational bolt-catch mechanism.

The replica comes with a steel, 300 BB, Hi-Cap magazine. 

Specna Arms replicas are compatible with many magazines
available on the market, from manufacturers like:
 – BOYI,
 – Airsoft Systems,
 – SRC,
 – King Arms,
 – MAG, 
 – STAR,
 – ACM.

SAEC™ system is included in the European Patent with a
number: 002639500

The set does not include a battery or a charger.

The set includes:

– replica
– magazine 
– fixed iron sights
– additional main spring

ATTENTION:

According
to report number HKGEC1600157401, the product meets the requirements of
European Union RoHS – Restriction of Hazardous
Substances 2011/65/EU directive annex II as well as 2002/95/EC amending
directive.

Which means that Specna Arms free from
harmful materials such as:
– lead
– mercury
– cadmium
– hexavalent chromium
– polybrominated biphenyl (PBB)
– polybrominated diphenyl
ether (PBDE)