Arsenalas

Aprašymas

SW-020TA carbine replica

Shooting weapons in the bull-pup system (sometimes called bullpup) have a long tradition and as many supporters as skeptics. One of the advantages of this type of construction, however, is hard to dispute – it is the possibility of using a really long and effective barrel, while maintaining the relatively compact dimensions of the carbine itself. You can’t forget about the aesthetic value – bull-butts are simply characteristic and cannot be confused with anything else.

Just like in the live firearm, the body of the replica is made of a strong polymer plastic. Metal was used for the production of the entire front part of the replica, as well as small elements such as the shell ejection flap or the flash hider.

Both in the rear and front part of the replica there are metal holders for attaching a tactical sling. Access to the hop up system adjustment knob is obtained as standard, after pulling the charging handle and thus revealing the shell ejection window. The handle can be locked in the rear position. What is characteristic of this construction, the ejector windows are located on both sides, thanks to which a left-handed user will also have convenient access. The flash hider was mounted on a 14mm, left-hand thread.

The replica’s battery is located inside the stock (if we can use this word on the occasion of the – nomen omen – stockless system). To do this, simply remove the rubber foot. You do not need any tools for this, because it is „press-fitted”. It also takes a few seconds to disassemble the entire carbine into two parts – when we want, for example, to get to the hop-up chamber and the inner barrel. To do this, all you need to do is press the metal pin – the lock and pull out the fire selector, and then separate the structure into 2 parts – the body and the front part and the barrel.

The replica, apart from the RIS rail under the barrel, has an integrated scope with an adjustable reticle.

The carbine has a two-stage trigger assembly, the shallower pressing of which causes a single shot, while the deeper one – continuous fire. The safety is located on the pistol grip and can be operated on both sides.

The replica is equipped with a quick spring replacement system that allows you to replace the main spring with minimal time. There is no need to remove the gearbox and unscrew the entire structure: just remove the buttplate, unscrew the plastic plug, and then through the hole in the back of the gearbox, remove the guide with the spring. The system enables quick and efficient adjustment of the replica’s power to the conditions expected on the airsoft battlefield, without the need for access to a workshop or a number of specialized tools. We can now easily guarantee the perfect compromise between firing efficiency and safety for ourselves and other players.

The replica comes with a hi-cap magazine made of plastic with a capacity of 330 BBs.

The kit does not include a battery or charger.

The set includes:

– replica
– magazine
– user manual
– front grip on RIS