SA-A02 SAEC™ System Assault Rifle Replica
SA-A02 assault rifle replica by Specna Arms is made largely of a uniform zinc and aluminum alloy, reinforced with steel elements in the most vulnerable points of the replica (steel elements – all the screws, pins and tactical sling swivels). Both the SF stock storing the battery and the pistol grip were made of polymer. The receiver of the replica and RIS handguard have undergone the process of anodizing, which guarantees a high degree of protection against corrosion. The paint was applied via a process of powder coating, after having the surface undergo the process of sandblasting prior to the application of paint. This method of paint application is known from replicas, for instance, by G&P and provides a much higher than usual resistance of the applied paint to abrasion. The receiver bears USMC markings.
The replica’s parts are very well aligned – in a way that could be thus far noticed solely in replicas by such top-tier manufacturers as G&P or Classic Army, the replica is also perfectly balanced. This allows for an almost ideal maneuverability of the replica and its weight is almost unnoticeable once the replica has been shouldered.
The replica features a new generation quick spring release system, so-called SAEC™. Due to that system, it is possible to rapidly and quickly adapt the power of the replica to the conditions expected on the playing field without the necessity to have the access to a workshop or a set of special tools. The spring change process is even faster than in the case of the previous version of the system.
Thanks to SAEC™ System, there is no need to take out the gearbox from the replica – all that is required is to remove the stock slide (no tools are necessary – it is attached with a tightened ring and a latch), afterward it is necessary to loosen the located underneath pin along with a bearing-mounted spring slide. We exchange the main spring, screw in the pin back in the body, attach the stock and… we’re back in the game! The entire operation lasts but a moment and, let us say it again, does not require the use of any tools.
The advantages of SAEC™ system are hard to overstate. In the light of the current tendency in the whole Europe to use legal limitations regarding the muzzle velocity of replicas or internal regulations inside various groups, the system guarantees the User a varied set of possibilities and plenty of freedom. SAEC™ system allows with a minimal amount of time to change the main spring, thusly customize the muzzle velocity towards the area of the game in such a way so as to guarantee an ideal compromise between the effectiveness of fire and safety for the User himself as well as other participants.
The replica is fully compatible with LiPo and LiFe batteries. Due to the base muzzle velocity of ~430 FPS provided by the main spring installed by default by the manufacturer, the replica is perfect for operating on a medium range. The set also includes an M90 spring, which allows to reduce the muzzle velocity to ~310 FPS and as a result to adapt the replica for close-ranged and indoor operations.
A reinforced at the cylinder level gearbox contains a steel spring slide that is an element of SAEC™ system and mounted on 8 mm ball bearings and washers steel gears. The system is secured with four anti-reversal latches. A light, made of polycarbonate polymer piston is equipped with a set of steel teeth in order to increase its durability. There is a type 2 cylinder and the steel breaker. Replica is factory-fitted with and accurate, rotary type polymer Hop-Up unit that allows very precise and stable regulation of BB overclocking.
The upgraded version features an array of new, reinforced parts such as:
– set of reinforced, steel gears
– bearing-mounted, steel spring slide
– light, polymer piston with a steel strip
– aluminum tightened piston head
– metal cylinder head
– tightened, metal nozzle
The replica is equipped with a long, top, RIS 22 mm rail and a RIS handguard. This allows to mount a wide array of additional attachments on the replica, starting with optical sights, through grips and tactical lighting and ending up with laser sights. The top RIS rail features metal flip-up iron sights, which can be rapidly detached. Due to the extendable stock with an anti-slip stock pad, it is possible to adapt the replica’s length to the body type and preferences of the User. Standard flash hider is based on a 14 mm left-hand thread, which allows the attachment of a silencer in its place.
In order to enhance the realism of the game, the replica also features an operational bolt-catch mechanism.
The replica also comes with a steel, 300 BB, Hi-Cap magazine. Its color pattern is appropriate for magazines intended for live firearms typically used by armed forces.
Specna Arms replicas are compatible with many magazines available on the market, from manufacturers like:
– Airsoft Systems,
– King Arms,
SAEC™ system is included in the European Patent with a number: 002639500
The set does not include a battery or a charger.
The set includes:
– additional main spring
According to report number HKGEC1600157401, the product meets the requirements of European Union RoHS – Restriction of Hazardous Substances 2011/65/EU directive annex II that amends the 2002/95/EC concerning the limitation of dangerous substances in electronics.
Which means that Specna Arms free from harmful materials such as:
– hexavalent chromium
– polybrominated biphenyl (PBB)
– polybrominated diphenyl ether (PBDE)
There are no reviews yet.