Description

    GR4 FF26 electric
assault rifle replica

The GR4 FF26 electric assault rifle replica is made by the G&G company. Metal, including steel, and
plastic was used to make this replica. The dust cover, the actuator, the
trigger and the muzzle flash and also the iron aiming sights were made of
steel. The stock”s pipe, the body, the outer barrel and most of the minor
elements were made of an homogenous alloy of zinc and aluminum. The stock”s
foot was made of plastic. The stock”s length is adjustable what allows to
adjust the replica to the conditions and built of the user.

The firing mode selection
lever is located on the left side of the replica and is marked with graphic
markings of the firing mode. The replica is equipped with the PBB system  which perfectly imitates the
operation of the original equivalent. It sets the bolt carrier dummy in motion
and gives a perceptible “kick” effect felt on the shooter”s shoulder.

After pulling the cocking
handle, the dust cover opens and the bolt carrier”s dummy moves backwards to
the rear position. This allows to adjust the hop-up system. What is important,
also the actuator plays an important role here: when it is pressed, the
anti-reversal lever located in the replica”s gearbox is released thanks to what
the main spring is released. This significantly extends the replica”s lifespan
and allow to preserve the high muzzle velocity by minimizing the main spring”s
wear effect.

The replica was made in the
colors of black, with contrasting pink elements.. It is perfect for fighting on
short and middle distances due to the use of the M110 main spring that
guarantees the muzzle velocity of about 360 FPS. The use of single top RIS rail
allows for the attachment of any given optical aiming device. Moreover, thanks
to the complete RIS rail system that is located in the place of the front grip
it is possible to attach any willing optical aiming sight. The battery is
placed inside the front grip.

The GR4 FF26 electric assault rifle replica is perfect to be used as a primary assault weapon. Thanks
to the applied barrel length and the sealed pneumatic unit which is equipped
with a high quality hop-up chamber and rubber allow to reach the reasonable
muzzle velocity and to preserve a stable BB pellet trajectory and great range.
The muzzle velocity is proper so it is safe and effective to use the replica on
both, CQB/MOUT and open area skirmishes.

An extraordinary Blow-Back
system, known from the Top Tech replica ( the more “professional” and what
follows it – the more expensive G&G line ), provides additional realism for
the user of the replica and ensures additional experiences for the user
himself.

The Pneumatic Blow-Back system
operates on the principal of taking a part of the compressed air from the
gearbox to a special cylinder that is located above the gearbox’s casing. The
small piston that is located in the Pneumatic Blow-Back system moves a thin
plate that is attached to it. The plate imitates the bolt carrier.

ATTENTION: The manufacturer does not
recommend using batteries stronger than 8,4V due to the fact of the possibility
of damaging the aforementioned plate.

The G&G replica’s that are
equipped with the Pneumatic Blow-Back system have got a reinforced and modified
V.2 gearbox. The modification that was made was the adaptation of the gearbox
to the Pneumatic Blow-Back system and adding the “active main spring release”
button in the form of the actuator.

The gearbox is equipped with
8mm ball bearings, a brass cylinder”s head and an aluminum piston head.

The set does not include a
battery and a charger. 

    The set includes:

– the carbine replica,
– a magazine,