Description

SA-G12 EBB carbine replica

Well known on the airsoft market Specna Arms brand presents SA-G Series! SA-G replicas with their level of workmanship can boldly compete with replicas of top manufacturers. G-Series are carbines in several interesting configurations, including models equipped with an integrated scope, collimator, bipod, or front grip in the KeyMod system.

The replica, as in the original, is made of very durable polymer, metal, and in the most critical areas of steel (so all screws, pins and the tactical suspension mount are steel). The replica is equipped with a 22mm front RIS rail (top, bottom and sides).

The replica is characterized by a very good fit, it is made of eye-pleasing matte polymer. The more important parts are connected by pins, in this way we can change individual elements such as the magazine slot. Made of solid polymer, the replica’s body has an individual serial number, manufacturer’s markings and aesthetic fire selector markings. On the back of the replica there is a classic transport grip with a 22mm RIS rail, as well as adjustable, fixed targeting instruments. The replica has a side-folding buttstock, which will make it easier to transport and also to operate in tight spaces of buildings. The replica’s metal barrel is finished with a flame suppressor mounted on a 14mm CCW thread.

The heart of the replica is a reinforced V3 LiPo Ready gearbox, the design is fully modifiable and compatible with standard parts, so the replica can be tuned at will. Instead of the classic contact block, the replica uses a microstick – this release device improves the mechanism’s response to trigger presses, eliminates the possibility of burning contacts and also increases the rate of fire.

The replica has been fully adapted for use with LiPo and LiFe batteries. With a base initial discharge velocity of ~380 FPS guaranteed by the factory-installed mainspring, the replica is perfect for medium range operations.

The replica uses the Enter & Convert™ quick-change spring system. To access the Gearbox, simply knock out the pin located at the flask latch, then pull out the flask locking piece. We then gain access to the mainspring guide, which can be quickly and easily pulled out through the rear wall of the gearbox. This allows us to quickly and efficiently adjust the replica’s power to the conditions expected on the field of play without having access to a workshop or a number of specialized tools. The entire spring replacement takes 45 seconds and requires only one screwdriver.

The replica, as in the original, is adapted to be operated by both right- and left-handed people thanks to a double-sided fire selector.

The replica uses an interesting solution in the form of the EBB (Electric Blow Back) system, this system moves the slide, increasing realism by bringing it closer to its combustible counterpart. This system can be easily deactivated by unscrewing a special guide connecting the piston to the dummy slide.

A Hi-Cap type magazine with a capacity of 350 rounds is added to the kit.

Each replica undergoes, still at the factory, a zero inspection confirmed by a special certificate with a hologram and an individual serial number assigned to each replica.

The kit does not include a battery or charger.

The kit includes:

– replica – magazine