SA-A08
Assault Rifle Replica

SA-A08 assault rifle replica by Specna Arms is made
largely from a uniform zinc and aluminum alloy, reinforced with steel elements
in the most vulnerable points of the replica (steel elements – all the screws,
pins and tactical sling swivels). Both the SF stock storing the battery and the
pistol grip were made of
polymer. The receiver of the replica has undergone the process of
anodizing, which guarantees a high degree of protection against corrosion.
The paint was applied via a process of
powder coating, after having the
surface undergo the process of sandblasting prior to the application of paint.
This provides a much higher than usual resistance of the applied paint to
abrasion. The receiver bears USMC markings.

The replica’s parts fit very well together – in a way that could be thus
far noticed solely in replicas by such top-tier manufacturers as G&P or
Classic Army, the replica is also perfectly balanced. This allows for an almost
ideal maneuverability of the replica and its weight is almost unnoticeable once
the replica has been shouldered. 

The replica features a quick spring release system, so-called Enter
& Convert™. Due to that system, it is possible to rapidly and quickly
adapt the power of the replica to the conditions expected on the playing field
without the necessity to have access to a workshop or a set of special tools –
once the gearbox has been taken out of the replica’s body, the process of
spring change lasts literally seconds.

The advantages of Enter & Convert™
system are hard to overstate. In the light of the current tendency in the whole
Europe to use legal limitations regarding the muzzle velocity of replicas or
internal regulations inside various groups, the system guarantees the User a
varied set of possibilities and plenty of freedom. Enter & Convert™ system
allows with minimal amount of
time change the main spring, thusly
customize the muzzle velocity towards the area of the game in such a way so as
to guarantee an ideal compromise between the effectiveness
of fire and safety for the user himself as well as other participants.

The replica is fully compatible with LiPo and LiFe batteries. Due to a base muzzle velocity of ~410 FPS provided by the main
spring installed by default by the manufacturer, the replica is perfect for
operating on a medium range. The set also
includes an M90 spring, which allows reducing the muzzle velocity to ~310
FPS and as a result to adapt the replica for close-ranged and indoor
operations.

A reinforced at the cylinder level gearbox contains a steel spring slide
that is an element of Enter & Convert™ system and mounted on 8mm ball bearings and caps steel gears. The system is secured with four
anti-reversal latches. A light, made from a polycarbonate polymer piston is
equipped with a steel tooth in order to increase its durability. Also a
type 2 cylinder and a steel circuit-breaker, as well as a metal
Hop-Up chamber.

The replica is equipped with a 22 mm top RIS rail and an adjustable
stock. The top RIS rail features metal flip-up iron sights, which can be freely
detached in order to make room for the attachment of a chosen optoelectronic
aiming device. Due to the extendable stock with an anti-slip stock pad, it is possible to adapt the replica’s
length to the body type and preferences of the user. Standard flash hider is
based on 14 mm left-hand thread, which allows the attachment of a silencer in
its place.

In order to enhance the realism of the game, the replica also
features an operational bolt-catch mechanism.

The replica is covered with a new generation A-TACS IX® camouflage using
Water Transfer technique. The use of water transfer guarantees a
high durability of the paint, resistance to external factors and scratching as
well as a very high accuracy and quality of the pattern.

ATTENTION: The photograph shows an example of the model. Due to the irregularity of
the camouflage pattern, the actual appearance of the pattern may slightly
differ from the one visible in the photograph.

The replica comes with a steel, 300 BB, Hi-Cap magazine. Its color
pattern is appropriate for magazines intended for live firearms typically used
by armed forces.

Specna Arms replica are
compatible with many magazines available on the market, from manufacturers like:
 – BOYI,
 – Airsoft Systems,
 – SRC,
 – King Arms,
 – MAG, 
 – STAR,
 – ACM.

The set includes:

– replica
– magazine 
– fixed iron sights
– additional main spring
– battery
– charger

Additional
accessories visible in the preview photographs are not part of the set!

ATTENTION:

According
to report number HKGEC1600157401, the product meets the requirements of European Union RoHS –
Restriction of Hazardous Substances 2011/65/EU directive
annex II that amends the 2002/95/EC concerning the limitation of dangerous
substances in electronics.

Which means that Specna Arms free from
harmful materials such as:
– lead
– mercury
– cadmium
– hexavalent chromium
– polybrominated biphenyl (PBB)
– polybrominated diphenyl ether (PBDE)