Description

SA-A34-HT ONE™ TITAN™ V2 Custom carbine replica

A limited version of the replica with the TITAN™ V2 Advanced system by GATE!

The TITAN™ V2 Drop-In mosfet controller set transforms the AEG into an advanced training replica. Thanks to it, you will gain a tactical advantage, thanks to the instant response to the trigger, with the possibility of modifying the replica and adapting it to each mission using 20 available functions. This is the most advanced and top model of the GATE company.

The TITAN™ V2 controller breathes a completely new life into an airsoft electric replica.

TITAN™ gives you new possibilities:

– Trigger sensitivity adjustment
– Pre-cocking boost, i.e. adjusting the tension of the spring (shortens the time from pressing the trigger to the shot)
– Adjustment of fire selector modes
– Burst shot mode
– Adjustment of the rate of fire
– Alerts you when the battery is low
– Protects the battery from damage
– “Sniper Delay”
– Full cycle detection
– AUG mode – the ability to set two trigger sensitivity (single and continuous fire)

Full description of the system: https://gunfire.com/pl/products/titan-tm-v2-advanced-set-rear-wired-1152218717.html

The SA-A34 carbine replica by Specna Arms is made mostly of a uniform zinc and aluminum alloy, with the use of steel elements in the most sensitive points of the replica (so all screws, pins and the tactical sling handle are made of steel). The stock and the pistol grip are made of polymer plastic. The body of the replica and the set of RIS rails have been anodized, which guarantees a high degree of protection of the replica against corrosion. The painting of the replica itself was made using the powder coating process, after prior sandblasting of the surface. This ensures a much higher than usual abrasion resistance of the applied paint. USMC markings have been applied to the body.

The replica was fitted very well – in a way that could be observed almost exclusively with G&P or Classic Army class manufacturers – and perfectly balanced. This ensures perfect maneuverability of the replica, and its weight is almost imperceptible when the replica is placed next to the shoulder.

The replica uses a quick spring replacement system, the so-called Enter & Convert™. This allows for quick and efficient adjustment of the replica’s power to the conditions expected on the playing field without having access to a workshop or a number of specialized tools – after removing the gearbox from the replica’s body, the spring replacement process itself takes literally a few seconds.

The advantages of the Enter & Convert™ system are hard to overestimate. In the light of the Europe-wide tendency to apply legal restrictions on the muzzle velocity of the replica and the arrangements existing within the environments themselves, this system guarantees the user considerable possibilities and a lot of freedom. The Enter & Convert™ system allows you to replace the main spring with minimal time, and thus adjust the muzzle velocity of the replica to the area of the game so as to guarantee the perfect compromise between the effectiveness of fire and the safety of yourself and other players.

The replica has been fully adapted to work with LiPo and LiFe batteries. Thanks to the basic initial muzzle velocity of ~410 FPS guaranteed by the factory-installed main spring, the replica is perfect for medium-range operations. The set also includes an M90 spring, which allows you to reduce the initial speed to ~ 310 FPS, thus making the replica perfectly adapted to short-range operations or inside buildings.

The gearbox, reinforced at the height of the cylinder head, hides a steel spring guide that is part of the Enter & Convert™ system and steel gears mounted on 8-mm ball bearings and washers. The system is secured with four anti-return latches. The lightweight piston made of polycarbonate plastic is equipped with a steel tooth to increase its durability. A type 2 cylinder and a steel interrupter as well as a metal hop-up chamber were also used here.

The Upgraded version has a number of new, reinforced parts, such as:

– a set of reinforced steel gears
– steel spring guide
– light, polymer piston
– aluminum, sealed piston head
– metal cylinder head
– sealed metal nozzle

The replica is equipped with a top 22 mm RIS rail, a set of MLOK front rails and an adjustable SF type stock. Flip-up sights are mounted on the upper RIS rail, but they can be freely replaced by any optoelectronic sighting device. Thanks to the extendable stock with a non-slip footplate, it is possible to adjust the length of the replica to the build and preferences of the shooter. The flash hider is mounted on a 14-millimeter left-hand thread, which allows you to attach a silencer in its place.

To increase the realism of the game, the replica is also equipped with a working bolt release.

The set with the replica also includes a steel hi-cap magazine that holds 300 BBs.

Specna Arms replicas are compatible with many magazines available on the market, including from such manufacturers as:
– BOYI,
– Airsoft Systems,
– SRC,
– King Arms,
– MAG,
– STAR,
– ACM.

The set does not include the battery and charger.

The kit includes:

– a replica with the TITAN™ V2 system installed
– USB connector for controlling the unit using the GATE Control Station application
– magazine
– mechanical sights
– additional main spring

INFORMATION

According to the report number HKGEC1600157401

The product meets the requirements of the EU RoHS Directive – Restriction of Hazardous Substances, Directive 2011/65/EU annex II; recasting Directive 2002/95/EC
Dealing with limiting the content of hazardous substances in electronics.

Which means that Specna Arms replicas are free from harmful materials, such as:
– lead
– mercury
– cadmium
– hexavalent chromium
– polybrominated biphenyl (PBB)
– polybrominated phenyl ether (PBDE)