1911 R2 Blackwater Airgun

A
heavy replica of military Colt 1911 made entirely from metal. The replica fires
4,5 mm BBs. Powered by 12 g CO2 capsule placed inside
an 18 BB magazine. The pistol operates – like the original live firearm – both
in SA (Single Action) and DA (Double Action) modes. The replica features the
original logo of the American PMC Blackwater on the
receiver.

The
trigger can be locked – as in the original – via a double-sided winged safety,
which cannot be fully switched off without pressing the grip safety, which is
only possible in the case of correct hand placement. According to a standard
set out after the introduction of M1911A1 the grip safety’s spur is prolonged
and protects the hand from being hit by the slide during its backward movement.

Each
squeeze of the trigger results in the slide being jerked backwards, which cocks
the hammer and the returning movement of the slide introduces a BB into the
barrel, from where it is fired with a muzzle velocity of 95 m/s upon the
squeeze of the trigger. When the magazine has been emptied, the slide will
remain in rear position. Its release it possible after interacting with the
slide release lever.

The
grip features an anti-slip texture where the grip meets the user’s hand – which
prevents the hand from slipping and improves the control over the pistol. Due
to integrated spin up system, which gives a BB a spin, the pistol’s accuracy
has been significantly improved. At the bottom of the grip is a hole that
enables the attachment of a pistol to a tactical sling safeguarding the pistol
from getting lost.

Fixed
iron sights consist of the front and rear sights. Both feature white dots
imitating high-contrast tritium devices – they make aiming easier in low-light
conditions by significantly speeding it up.

Under
the barrel is a 22 mm mounting rail (in MIL-STD 1913 standard, more
commonly referred to as Stanag2324, Weaver or Picatinny)
enabling the attachment of a tactical flashlight or a laser sight.

The set includes:

–
airgun
– magazine
– manual